Westermo GD-01 - Manual (Page 148)

148 6196-2220
AT commands for GPRS
+CGDCONT – Define PDP Context, (GPRS command)
Description
This command specifies PDP context parameter values for a PDP context identified by
the local context identification parameter, . Eleven PDP contexts can be defined
through software. A special form of the set command, +CGDCONT= causes the
values for context number to become undefined.The test command returns values
supported as a compound value. If the MT supports several PDP types, , the
parameter value ranges for each are returned on a separate line.The read
command returns the current settings for each defined context.The test command
returns values supported as a compound value. If the MT supports several PDP types,
are returned on a sepa-
rate line.
Syntax:
+CGDCONT=[ [, [, [, [,
[,]]]]]]
+CGDCONT?
+CGDCONT=?
Response Syntax:
OK
ERROR
Response on “+CGDCONT?”:
+CGDCONT: , , ,, ,
[+CGDCONT: , , ,, ,
[...]]
Response on “+CGDCONT=?”:
+CGDCONT: (range of supported s), ,,,(list of supported
s), (list of supported s)
[+CGDCONT: (range of supported s), ,,,(list of supported
s),(list of supported s) [...]]
Defined values:
:
(PDP Context Identifier) a numeric parameter (1-32) which specifies a particular PDP
context definition.The parameter is local to the TE-MT interface and is used in other
PDP context-related commands.
B A C K