Westermo GD-01 - Manual (Page 66)

66 6196-2220
+CMGW – Write Message to Memory
Description:
This command stores a message in memory (either SMS-SUBMIT or SMS-DELIVERS).
The memory location is returned (no choice possible as with phonebooks
+CPBW).Text or PDU is entered as described for the Send Message +CMGS command.
Command syntax in text mode:
AT+CMGW= [, [, ] ]
enter text
Command syntax in PDU mode:
AT+CMGW= [,]
give PDU
Response syntax:
+CMGW: or
+CMS ERROR: if writing fails
Command example Possible responses Note
AT+CMGW= +CMGW: 4 Write a message in text
”+33146290800” mode, result:
Hello how are you? OK Message stored in index 4
AT+CMGW= +CMGW: Write a message in PDU
OK mode, result:
message stored in
Defined values:
Parameter Definition:
: Originating or Destination Address Value in string format.
: Type of Originating / Destination Address.
: Integer type in PDU mode (default 2 for +CMGW), or string type
in text mode (default “STO UNSENT” for +CMGW). Indicates the
status of message in memory. If is omitted, the stored mes-
sage is considered as a message to send.
0: “REC UNREAD”
1: “REC READ”
2: “STO UNSENT”
3: “STO SENT”
Length of the actual data unit in octets.
B A C K