Westermo GD-01 - Manual (Page 24)

24 6196-2220
+CICB – Incoming Call Bearer
Description:
This specific command is used to set the type of incoming calls when no incoming bearer
is given (see +CSNS).
NOTE: setting the +CICB command affects the current value of +CSNS.
Syntax:
AT+CICB=
Command example Possible responses Note
AT+CICB=1 OK If no incoming bearer,
force a fax call
AT+CICB=2 OK If no incoming bearer,
force a voice call
AT+CICB? +CICB: 2 Interrogate value,
incoming bearer:
voice call
AT+CICB=? +CICB: (0-2) Test command, speech,
data or fax may be
reported
Defined values:
0: Data
1: Fax
2: Speech
B A C K