Westermo GD-01 - Manual (Page 76)

76 6196-2220
0: Disable
1: Enable
2: Interrogate
3: Registration
4: Erasure
1: Voice
2: Data
3: Fax
4: Short Messages
5: All classes
NOTE: The combination of different classes is not supported, it will only result in the
activation / deactivation / status request of all classes.
In the case where the FDN phonebook is activated, the registration is restricted to the
phone numbers written in the FDN.
not managed
not managed
For = 2 (No reply), 4 (all call forwarding) and 5
(all conditional call forwarding), time to wait (1 to 30)
in seconds before call is forwarded. Default value is 20.
+CLCK – Call barring
Description:
This command allows control of the call barring supplementary service. Locking, unlock-
ing or querying the status of call barring is possible for all classes or for a class.
Syntax:
AT+CLCK= , [, [, ] ]
Response Syntax: (for =2 and command successful)
+CLCK: [, [ +CLCK: , [... ] ]
Command example Possible responses Note
AT+CLCK=”AO”,1,1234 OK Command valid
AT+CLCK=”AO”,0,5555 +CME ERROR: 16 Wrong password
AT+CLCK=”AO”,0,1234 OK Command valid
B A C K