Sierra Video UPC-166 - Manual (Page 98)

3
UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
conversions without losing Dolby
®
metadata.
space for re-inserted Dolby ® metadata.
picture area depending on video format. See Ancillary Data Line
data unless existing metadata is to be intentionally overwritten.
3-54 UPC-166-OM
(V4.0)
Extracts and preserves Dolby
®
metadata from the input
SDI, and in turn allows the metadata to be re-inserted in
the output SDI. This allows scaling and/or format
• Metadata Embedding Metadata Embedding (On/Off) controls SMPTE 2020-1 metadata
embedding in the SDI video output.
• When set to On, metadata is extracted from the SDI input video,
buffered, and re-directed to the output SDI video.
• When set to Off, metadata is not embedded in the output SDI video.
• Metadata Output Line
Allows selection of SMPTE 2020-1 metadata line location within the VANC
(Range is 9 thru 41)
Note: • Although the output line drop-down will allow any choice within the
9 thru 41 range, the actual range is automatically clamped (limited
to) certain ranges to prevent inadvertent conflict with active
Number Locations and Ranges (p. 3-15) for more information.
• The card does not check for conflicts on a given line number.
Make certain the selected line is available and carrying no other
Note: The Metadata Output Source button in DashBoar d™ is locked to Input Video for this card. With this function enabled,
the extracted metadata is always available in the SDI video output and on cards equipped with an appropriate Rear I/O
Module having a Dolby
® metadata RS-485 connector.
Card Edge Control Menu:
Aud
Line number (9 thru 41)
1
Dlby
2
Line
3
(value)
Card Edge Control Menu:
Aud
Embed metadata
Do not embed metadata
1
Dlby
2
DMEM
3
On
Off