Sierra Video UPC-166 - Manual (Page 110)

3
UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
3-66 UPC-166-OM
(V4.0)
(continued)
• Preset Name With one of 16 presets selected, provides for entry of custom name for the
preset (as shown in example below).
Entering text in Preset
Name field (in this
example,
―RCVR21‖)
applies custom name to
selected Preset (in this
example, Preset 2)
Note: • Preset name can be seven ASCII characters maximum.
• The Preset ID number does not need to be entered; it is
added automatically.
• Reset Current Preset • Reset Current Preset resets all parameters (including preset custom
name entered) of the currently selected Preset (as displayed in the
Selected Preset field) to factory default settings.
The above button has a Confirm? pop-up that appears, requesting
confirmation.
The factory default settings are as follows:
• Download Presets Download Presets allows all 16 presets to be stored to a specified location
on a network computer for use with other same-model COMPASS
™
cards.
Refer to Cobalt ® reference guide ―COMPASS™ Remote Control User
Guide ‖ (PN 9000RCS-RM) for instructions on using the Download Presets
function.
Function Parameter/Setting
Audio Mapping
(Embedded Audio
Group 1/2 and
Embedded Audio
Group 3/4) Audio mapping reset for simultaneous
embedding and de-embedding:
• Discrete AES input channels 1-16 are
mapped to embedded audio output
channels 1-16.
• Embedded audio input channels 1-16 are
mapped to discrete AES output channels
1-16.
Audio Input
Controls AES SRC, Passthrough, and Zero Delay
Embedding are all disabled.
Audio controls (all
audio functions) All Gain and Phase (polarity) controls are
set to unity and normal, respectively.
Closed
Captioning Closed captioning set to On.
Timecode Source priority 1 thru 4 all set to None.
Video Proc All parameters set to unity/null settings.
Framesync Framesync is disabled; Reference 1 or 2
must be selected to enable the frame sync.
Scaler • Scaler is enabled, with output set to be
the same as input.
• Output half-rate 720p is turned off.
• Aspect ratio conversion is turned off.