Upc-166 function submenu list and descriptions – Sierra Video UPC-166 User Manual
Page 94

3
UPC-166 Function Submenu List and Descriptions
Table 3-2
UPC-166 Function Submenu List
—
continued
•
3-50
UPC-166-OM
(V4.0)
(continued)
• Analog Ch 1 thru Ch 8 as Source
•
•
Analog Ch 1 thru Analog Ch 8 range in Source drop-down list enables a
balanced-input analog channel (Ch 1 thru Ch 8) to be the source for the
selected destination AES channel.
(In this example, Analog Ch1 is the source for destination AES Ch 1)
• Down Mix Left or Right as Source
Down Mix Left and Down Mix Right selections in Source drop-down list
allow either downmix left or right channel to be the source for the selected
destination AES channel.
(In this example, the Down Mix Left channel is the source for destination
AES Ch 1)
Note: Down Mix Left and Down Mix Right channels are a stereo pair
derived from the L, C, R, Ls, and Rs channel inputs selected using
the Audio Mixing function. The stereo pair consists of basic L/R
PCM signals with no additional encoded information.
Refer to Audio Mixing function description on page 3-60 for more
information.
• Mono Mix as Source
Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination AES channel.
(In this example, the mono content is the source for destination AES Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-60 for more information.
Card Edge Control Menu:
Aud
Mono mix selection
as source
1
AES
2
Ch(n)
3
Src
4
Mono
Card Edge Control Menu:
Aud
Downmix L channel
Downmix R channel
1
AES
2
Ch(n)
3
Src
4
DM L
DM R
Card Edge Control Menu:
Aud
Source; Analog
Channel (1 thru 8)
1
AES
2
Ch(n)
3
Src
4
An(n)