Sierra Video UPC-166 - Manual (Page 84)

3
UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
Audio Group 1
AES I/O (1-4)
AES IN (5-8)
20 dB
AN-AUD
20 dB
Audio Group 2
3-40 UPC-166-OM
(V4.0)
Selects the audio source for each embedded audio
channel 1 thru 8 (Embedded Audio Groups 1 and 2).
Also provides Gain, Phase Invert, and Muting controls
for each channel.
Embedded
Embedded
Channels 1 – 16
+
0 dB
0 dB
+
B
+
IN (1-8)
+
Embedded
CH8
CH7
CH6
CH5
CH4
CH3
CH2
CH1 +
0 dB
Embed Ch 12
Embed Ch 14
+
0 d
AES Ch 1
AES Ch 3
AES Ch 5
AES Ch 8
Analog Ch 3
15 dB
–
TG1
-10 dB
The example above shows
various Source selections and
individual audio control settings
for various audio sources fed to
the Destination channels
Embedded Ch 1 thru
Embedded Ch 8 in Embedded
Audio Groups 1 and 2, with the
resulting setup (right).
The source-to-destination
correlation shown here is only an
example; any of the sources on
the left can connect to any of the
destinations on the right, or to
Embedded Audio Groups 3 and
4 (not shown here). Additional
sources not shown here are also
available. These are described
on the following pages.
The controls shown here are
described in detail on the
following pages.