Safety summary – Sierra Video UPC-166 User Manual

Page 8

Safety Summary

Labeling Symbol Definitions

Safety Summary

Warnings

To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Cautions

This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.

This product is intended to be a component product of an openGear

™ frame. Refer to the

openGear

™ frame Owner's Manual for important safety instructions regarding the proper

installation and safe operation of the frame as well as its component products.

Heat and power distribution requirements within a frame may dictate specific slot
placement of cards. Cards with many heat-producing components should be arranged to
avoid areas of excess heat build-up, particularly in frames using only convection cooling.
The UPC-166 has a moderate power dissipation (24 W max.). As such, avoiding placing
the card adjacent to other cards with similar dissipation values if possible.

If required, make certain Rear I/O Module(s) is installed before installing the UPC-166 into
the frame slot. Damage to card and/or Rear I/O Module can occur if module installation is
attempted with card already installed in slot.

If card resists fully engaging in rear I/O module mating connector, check for alignment and
proper insertion in slot tracks. Damage to card and/or rear I/O module may occur if
improper card insertion is attempted.

1-4

UPC-166-OM
(V4.0)

CAUTION

! WARNING !

Attention, consult accompanying documents.

Electronic device or assembly is susceptible to damage from an ESD
event. Handle only using appropriate ESD prevention practices.

If ESD wrist strap is not available, handle card only by edges and avoid
contact with any connectors or components.

Symbol (WEEE 2002/96/EC)

For product disposal, ensure the following:
• Do not dispose of this product as unsorted municipal waste.
• Collect this product separately.
• Use collection and return systems available to you.