Sierra Video UPC-166 - Manual (Page 93)

Operating Instructions UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
•
•
3-49 UPC-166-OM
(V4.0)
(continued)
Note: • AES Ch 2 thru AES Ch 8 have controls that are identical to the Source, Gain, Mute, and Phase controls described
here for AES Ch 1. Therefore, only the AES Ch 1 controls are shown here.
• For each channel, its source and destination should be considered and appropriately set. Unused destination channels
should be set to the Silence selection.
• AES Channel Source Using the Source drop-down list, selects the audio source to be routed to
the corresponding AES output channel from the choices described below.
• Embedded Ch 1 thru Ch 16 as Source
•
•
Embed Ch 1 thru Embed Ch 16 range in Source drop-down list enables
an embedded channel (Ch 1 thru Ch 16) to be the source for the selected
destination AES channel.
(In this example, Embed Ch 1 (embedded Ch 1) is the source for
destination AES Ch 1)
• AES Ch 1 thru AES Ch 16 as Source
•
•
AES Ch 1 thru AES Ch 16 range in Source drop-down list enables a
discrete AES channel (Ch 1 thru Ch 16) to be the source for the selected
destination AES channel.
(In this example, AES Ch 5 is the source for destination AES Ch 1)
Card Edge Control Menu:
Aud
Source; AES Ch (1 thru 16)
1
AES
2
Ch(n)
3
Src
4
Ae(n)
Card Edge Control Menu:
Aud
Source; Embedded
Channel (1 thru 16)
1
AES
2
Ch(n)
3
Src
4
Em(n)
Card Edge Control Menu:
Aud
Destination
channel number
Set up to select Source
1
AES
2
Ch(n)
3
Src