Sierra Video UPC-166 - Manual (Page 36)

2
Installing the UPC-166 Into a Frame
Slot
Figure 2-1 UPC-166 AES I/O (1-4) Mode
Switches
Installing the UPC-166 Into a Frame
Slot
Heat and power distribution requirements within a frame may dictate specific
slot placement of cards. Cards with many heat-producing components should
be arranged to avoid areas of excess heat build-up, particularly in frames
using only convection cooling. The UPC-166 has a moderate power
dissipation (24 W max.). As such, avoiding placing the card adjacent to other
cards with similar dissipation values if possible.
2-2 UPC-166-OM
(V4.0)
This device contains semiconductor devices which are
susceptible to serious damage from Electrostatic
Discharge (ESD). ESD damage may not be immediately
apparent and can affect the long-term reliability of the
device.
Avoid handling circuit boards in high static environments
such as carpeted areas, and when wearing synthetic fiber
clothing. Always use proper ESD handling precautions
and equipment when working on circuit boards and
related equipment.
CAUTION
CAUTION
Rear of Card
AES I/O 4
AES I/O
AES I/O
AES I/O
S11 S12 S13 S14 INPUT MODE
(Factory Default)
OUTPUT MODE
• • • •
3
2
1