Sierra Video UPC-166 - Manual (Page 58)

3
Checking UPC-166 Card
Information
Checking UPC-166 Card Information
The operating status and software version the UPC-166 card can be checked
using DashBoard™ or the card edge control user interface. Figure 3-7 shows
and describes the UPC-166 card information screen using DashBoard™ and
accessing card information using the card edge control user interface.
Note: Proper operating status in DashBoar d™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-7. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-70) for corrective
action.
Checking Card Using
Figure 3-7 UPC-166 Card Info
Utility
3-14 UPC-166-OM
(V4.0)
The Tree View shows the cards seen by DashBoard ™.
In this example, Network Controller Card MFC-8310-N
(serial number ...8053) is hosting a UPC-166 card in
slot 7.
Software Version Number
Refer to these numbers to check that documentation (such as
this manual) matches the card
’s Software Release Number
and Software Build Number. Use these numbers also when
co
Power Consumption and Temperature Displays
This display shows the power consumed by the UPC-
166 for both the +12V and -7.5V rails, as well as key
device temperatures.
Status Displays
These displays show the status the signal being received by
the UPC-166. Green Settings icon shows that any changes
made on DashBoar
d™ are sucessfully saved on the card’s
memory.
UPC-166_CARD_INFO.PNG
Info
Card Edge Controls
+12V Watts consumed
- 7.5V Watts consumed
Software Release Number
Software Build Number
FPGA Build Number
1
+POW
-POW
SWR#
SWB#
FPG#
2
(value)
(value)
(value)
(value)
(value)
mmunicating to Sierra Video regarding this card.