Sierra Video UPC-166 - Manual (Page 87)

Operating Instructions UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
information.
description on page 3-60 for more information.
3-43 UPC-166-OM
(V4.0)
(continued)
• Down Mix Left or Right as Source Down Mix Left and Down Mix Right selections in Source drop-down list
allow either downmixer left or right channel to be the source for the
selected destination Embedded Audio Group channel.
(In this example, the Down Mix Left channel is the source for destination
Embedded Ch 1)
Note: Down Mix Left and Down Mix Right channels are a stereo pair
derived from the L, C, R, Ls, and Rs channel inputs selected using
the Audio Mixing function. The stereo pair consists of basic L/R
PCM signals with no additional encoded information.
Refer to Audio Mixing function description on page 3-60 for more
• Mono Mix as Source Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination Embedded Audio Group channel.
(In this example, the mono content is the source for destination
Embedded Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
• Tone Generator 1 thru 4 as Source Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination Embedded Audio Group channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
Embedded Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-64 for
more information.
Card Edge Control Menu:
Aud
Source; TG 1 thru 4
1
Embd
2
Grp
3
Ch(n)
4
Src
TG(n)
Card Edge Control Menu:
Aud
1
Embd
2
Grp
3
Ch(n)
4
Src
Mono Mono mix selection
as source
Card Edge Control Menu:
Aud
1
Embd
2
Grp
3
Ch(n)
4
Src
DM L
DM R Downmix L channel
Downmix R channel