Sierra Video UPC-166 - Manual (Page 41)

Installation and Setup Installing a Rear I/O Module
Table 2-1 UPC-166 Rear I/O Modules —
continued
2-7 UPC-166-OM
(V4.0)
UPC-166 Rear I/O Module Description
RM-UPC-166-C
UPC-166C.PNG
Provides the following connections:
• SD-SDI coaxial input (SDI IN)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y/Cmpst, Pr/C, and Pb, respectively)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two dedicated AES coaxial audio inputs (AES IN 5
and AES IN 6)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Two buffered SDI coaxial outputs (SDI OUT)
RM-UPC-166-D
UPC-166D.PNG
Provides the following connections:
• SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Four dedicated AES coaxial audio inputs (AES IN 5
thru AES IN 8)
• Eight dedicated AES coaxial audio outputs
(AES OUT 1 thru AES OUT 8)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: AES OUT 1 thru AES OUT 4 on RM-UPC-
166-D Rear I/O Module always function as
outputs regardless of whether AES I/O 1 thru
AES I/O 4 are used as inputs or outputs.