Sierra Video UPC-166 - Manual (Page 76)

3
UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
3-32 UPC-166-OM
(V4.0)
Allows Safe Action and/or Safe Title overlays to be
added to the image. The overlays can be used to
identify safe action and safe title areas within the image.
Note: Overlay markers using this function are for setup only. When enabled, these markers are embedded in the SDI video
output signal and may appear in the image. Use this function only on preview video and not on-air video. Make certain
any overlay tools are turned off when done.
Note: Multiple overlay markers described below can be simultaneously enabled as desired.
• Safe Action Area When enabled (On), turns on the Safe Action Area overlay.
• Safe Title Area When enabled (On), turns on the Safe Title Area overlay.
Card Edge Control Menu:
Over
On
Off
1
Safe
2
Titl
3
On
Off
OVERLAY_SAFTLE1.0.PNG
When enabled (On), outline shows Safe Title Area boundary. Color
of boundary is selected using Color drop-down list.
Card Edge Control Menu:
Over
On
Off
1
Safe
2
Actn
3
On
Off
OVERLAY_SAFACT1.0.PNG
When enabled (On), outline shows Safe Action Area boundary.
Color of boundary is selected using Color drop-down list.