Sierra Video UPC-166 - Manual (Page 45)

Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the UPC-166 Card via Remote Control (p. 3-12)
• Checking UPC-166 Card Information (p. 3-14)
• Ancillary Data Line Number Locations and Ranges (p. 3-15)
• UPC-166 Function Submenu List and Descriptions (p. 3-16)
• Troubleshooting (p. 3-70)
Control and Display Descriptions
This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the UPC-166 card. The
UPC-166 functions can be accessed and controlled using any of the user
interfaces described here.
The format in which the UPC-166 functional controls, indicators, and
displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the UPC-166
functions (and the controls, indicators, and displays related to a particular
function) follows a general arrangement of Function Submenus under which
related parameters can be accessed (as described in Function
Submenu/Parameter Submenu Overview below).
After familiarizing yourself with the arrangement described in Function
Submenu/Parameter Submenu Overview, proceed to the subsection for the
particular user interface being used. Descriptions and general instructions for
using each of the three user interfaces are individually described in the
following subsections:
• UPC-166 Card Edge Controls, Indicators, and Display (p. 3-3)
• DashBoard™ User Interface (p. 3-8)
• Cobalt ® Remote Control Panel User Interfaces (p. 3-11)
3-1
UPC-166-OM
(V4.0)