Sierra Video UPC-166 - Manual (Page 49)

Operating Instructions Control and Display Descriptions
Embedded Audio
(embedded audio routing/control))
Inv
Figure 3-3 Card Edge Controls Setup of Example Embedded Audio Function (sheet 1 of 2)
3-5 UPC-166-OM
(V4.0)
Select a top-level menu item (in this example, select Aud
Submenu Depth
Audio Groups). This selects embedded audio function of the
group to be accessed.
(Enable).
sets the selected embedded audio group to Enabled.
Embedded Channel 1). This selects the embedded channel to be
embedded channel 1). This selects the source for the embedded
(embeddded channel 3 as source for embedded channel 1). This
channel 1.
adjustment field for selected embedded audio channel).
of 12.1 for this channel.
embedded channel 1).
polarity for embedded channel 1).
(continued on next page)
A
1
Embd
AES
Tone
2 3 4
Press Enter Menu and in this example, select Embd (Embedded
Audio processor.
B
Grp1
Grp2
Grp3
Grp4 Press Enter Menu again and in this example, select Grp1
(Embedded Audio Group 1). This selects the embedded audio
C
Enbl
Press Enter Menu again and in this example, select Enbl
D
On
Off
Press Enter Menu again and in this example, select On. This
E
Ch01
Ch02
Ch03
Ch04
Press Exit Menu and in this example, select Ch01 (Destination:
accessed.
F
Src
Gain
Pol
Press Enter Menu and select in this example, Src (source for
channel.
G
Em01
Em02
Em03
...
Press Enter Menu again and in this example, select Em03
selects embedded channel 3 as the source for embedded
H
Src
Gain
Pol
Press Exit Menu and in this example, select Gain (gain
I (gain
value)
Press Enter Menu again and in this example, select a gain value
J
Src
Gain
Pol
Press Exit Menu and in this example, select Pol (phase for
K
Norm
Press Enter Menu again and in this example, select Inv (invert