Sierra Video UPC-166 - Manual (Page 46)

3
Control and Display Descriptions
Note: Instructions provided here are applicable for all available user control meth-
ods. However, DashBoard ™ and the Remote Control Panel provide greatly
simplified user interfaces as compared to using the card edge controls. For
this reason, it is strongly recommended that DashBoar
d™ or a Remote
Control Panel be used for all card applications other than the most basic
cases.
Not all functions available using DashBoard ™ or the Control Panel are avail-
able using the card edge controls.
When a setting is changed, settings displayed on DashBoar d™ (or the
Remote Control Panel) are the settings as effected by the UPC-166 card itself
and reported back to the remote control; the value displayed at any time is
the actual value as set on the card.
Note:
Note:
Function Submenu/Parameter Submenu Overview
The functions and related parameters available on the UPC-166 card are
organized into function submenus, which consist of parameter groups as
shown below.
Figure 3-1 shows how the UPC-166 card and its submenus are organized, and
also provides an overview of how navigation is performed between cards,
function submenus, and parameters.
Figure 3-1 Function Submenu/Parameter Submenu Overview
3-2 UPC-166-OM
(V4.0)
If using DashBoard ™ or a Remote Control Panel, the
desired UPC-166 card is first selected.
The desired function submenu is next
selected.
Function Submenus consist of parameter
groups related to a particular UPC-166
card function (for example,
―Video Proc‖).
• • •
Individual Parameters
Each submenu consists of groups of parameters
related to the function submenu. Using the
―Video
Proc ‖ function submenu example, the individual
parameters for this function consist of various video
processor parameters such as Luma Gain, Saturation,
and so on.
Submenu z Submenu b Submenu a
UPC-166