Sierra Video UPC-166 - Manual (Page 40)

2
Installing a Rear I/O Module
UPC-166 Rear I/O
Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the UPC-166.
Note: Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied with
removable screw terminal block adapters. For clarity, the adapters are omit-
ted in the drawings below.
Table 2-1 UPC-166 Rear I/O
Modules
2-6 UPC-166-OM
(V4.0)
UPC-166 Rear I/O Module Description
RM-UPC-166-A
UPC-
166A.PNG
Provides the following connections:
• SD-SDI coaxial input (SDI IN)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y/Cmpst, Pr/C, and Pb, respectively)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two buffered SDI coaxial outputs (SDI OUT)
RM-UPC-166-B
UPC-
166B.PNG
Provides the following connections:
• SD-SDI coaxial input (SDI IN)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y/Cmpst, Pr/C, and Pb, respectively)
• Four analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 4)
• Two buffered SDI coaxial outputs (SDI OUT)
•
•
•
•
•
•
•
•
•
•
•
•