Sierra Video UPC-166 - Manual (Page 50)

3
Control and Display Descriptions
Figure 3-3 Card Edge Controls Setup of Example Embedded Audio Function (sheet 2 of 2)
3-6 UPC-166-OM
(V4.0)
Submenu Depth
channel selection). This selects an AES output channel as the
Channel 1).
for AES Output Channel 1).
(Embeddded Channel 1 as source for AES Output Channel 1).
adjustment field for selected AES output channel).
18.5 for this channel.
Embedded Channel 1).
AES output channel 1).
In Table 3-2, ―UPC-166 Function Submenu List‖ Card Edge Control Menu:
navigation required to access a particular
Card Edge Setup Abbreviated Diagram
abbreviated diagrams (as shown above and Aud
in the example to the right) show the
submenu item or parameter when using the
card edge controls.
Set embedded audio group to On
Set embedded audio group to Off
In this example, group enable for
Embedded Audio Group 1 is being enabled.
1
Embd
2
Grp1
3
Enbl
4
On
Off
L
1
Embd
AES
Tone
2 3 4 (continued from previous page)
Go to submenu 1 and in this example, select AES (AES output
output for this group.
M
Ch01
Ch02
Ch03
...
Press Enter Menu and in this example, select Ch01 (AES Output
N
Src
Gain
Pol Press Enter Menu again and select in this example, Src (source
O
Em01
Em02
Em03
...
Press Enter Menu again and in this example, select Em01
P
Src
Gain
Pol
Press Exit Menu and in this example, select Gain (gain
Q
(gain
value) Press Enter Menu and in this example, select a gain value of
R
Src
Gain
Pol Press Exit Menu and in this example, select Pol (polarity for
S Norm
Inv
Press Enter Menu and in this example, select Norm (no invert for