Sierra Video UPC-166 - Manual (Page 56)

3
Accessing the UPC-166 Card via Remote
Control
Accessing the UPC-166 Card via Remote Control
Access the UPC-166 card using DashBoard™ or Remote Control Panels as
described below.
Accessing the UPC-166 Card Using
DashBoard
™
On the computer connected to the frame LAN, open DashBoard™.
As shown below (in the left side Basic View Tree) locate the Network
Controller Card associated with the frame containing the UPC-166 card
to be accessed (in this example, “MFC-8310-N SN: 00108053”).
1.
2.
As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example,
“Slot 7: CDI-UPC-166 RCVR21”).
3.
.
As shown on the next page, when the card is accessed a DashBoard™ its
function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
3-12 UPC-166-OM
(V4.0)
UPC-166_DB_ACCESS2A.PNG
DB_ACCESS1.PNG