Sierra Video UPC-166 - Manual (Page 60)

3
UPC-166 Function Submenu List and Descriptions
UPC-166 Function Submenu List and Descriptions
Table 3-2 individually lists and describes each UPC-166 function submenu
(“tab”) and its related list selections, controls, and parameters. Where helpful,
examples showing usage of a function are also provided. Table 3-2 is
primarily based upon using DashBoard™ to access each function and its
corresponding submenus and parameters.
Note: All numeric (scalar) parameters displayed on DashBoar d™ can be changed
using the slider controls, arrows, or by numeric keypad entry in the corre-
sponding numeric field. (When using numeric keypad entry, add a return after
the entry to commit the entry.)
Note: Table 3-2 also provides abbreviated menu structure charts showing the menu
structure for accessing the function/parameter using the card edge controls.
Where this is not shown for a particular control, this indicates the control is
not available using card edge controls.
If using card edge controls, refer to UPC-166 Card Edge Control
Menu/Submenu Structure (p. 3-4) and Figure 3-3 for an explanation and an
example of card edge control menu structure navigation.
On DashBoard™ itself and in Table 3-2, the function submenu items are
organized using tabs as shown below.
The table below provides a quick-reference to the page numbers where each
function submenu item can be found.
3-16 UPC-166-OM
(V4.0)
Function Submenu Item Page Function Submenu Item Page
Video Signal Controls 3-17 AES Audio Out Pairs 1-4 3-48
Audio Input Controls 3-18 AES Audio Out Pairs 5-8 3-53
Video Proc 3-21 Dolby Metadata 3-54
Scaler 3-23 Closed Captioning 3-55
AFD 3-28 Timecode 3-56
Overlays 3-32 Audio Mixing 3-60
Framesync 3-36 Tone Generator 3-64
Embedded Audio Group 1/2 3-40 Licensable Features 3-64
Embedded Audio Group 3/4 3-46 Presets 3-65