Sierra Video UPC-166 - Manual (Page 65)

Operating Instructions UPC-166 Function Submenu List and Descriptions
Table 3-2 UPC-166 Function Submenu List —
continued
3-21 UPC-166-OM
(V4.0)
Provides the following Video Proc parametric controls.
• Video Proc Video Proc (On/Off) provides master on/off control of all Video Proc
functions.
• When set to Off, Video Proc is bypassed.
• When set to On, currently displayed parameter settings take effect.
• Reset to Unity Reset to Unity provides unity reset control of all Video Proc functions.
When Confirm is clicked, a Confirm? pop-up appears, requesting
confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
• Luma Gain Adjusts gain percentage applied to Luma (Y channel).
(0% to 200% range in 0.1% steps; unity = 100%)
• Luma Lift
Vid
Adjusts lift applied to Luma (Y-channel).
(-100% to 100% range in 0.1% steps; null = 0.0%)
Card Edge Control Menu:
1
Proc
2
Lift
3
(lift
value)
Luma lift in percent
Card Edge Control Menu:
Vid
Luma gain in percent
1
Proc
2
Gain
3
(gain
value)
Card Edge Control Menu:
Vid
Move toggle switch in either
direction to confirm unity
reset. Reject reset by pressing
Exit Menu pushbutton.
1
Proc
2
Unty
3
Y?
Card Edge Control Menu:
Vid
Video Proc On
Video Proc Off
1
Proc
2
Enbl
3
On
Off