Sierra Video UPC-166 - Manual (Page 52)

3
Control and Display Descriptions
The timeout period from when a menu is entered to when the display times
outs (reverts to the default card model display) can be adjusted from 5 to 9999
seconds (166.7 minutes) as described below.
1. Access the Displ (Display) menu.
2. Use the up/down switch to enter the desired timeout value as shown
below.
DashBoa
rd™ User Interface
(See Figure 3-5.) The UPC-166 function submenus are organized in
DashBoard™ using tabs (for example, “Embedded Audio Group 1/2” in
Figure 3-5). When a tab is selected, each parametric control or selection list
item associated with the function is displayed. Scalar (numeric) parametric
values can then be adjusted as desired using the GUI slider controls. Items in
a list can then be selected using GUI drop-down lists. (In this manner, the
setting effected using controls and selection lists displayed in DashBoard™
are comparable to the submenu items accessed and committed using the
UPC-166 card edge controls.)
Figure 3-5 shows the same setup described in Figure 3-3 as performed using
DashBoard™. Note how this setup is greatly simplified using DashBoard™
with most of the discrete tasks (
A through S in Figure 3-3) performed
with the card edge controls now rolled into simple actions using
DashBoard™.
3-8 UPC-166-OM
(V4.0)
Card Edge Control Menu:
Disp
Timeout value (in seconds)
1
TOUT
2
(value)