Upc-166 function submenu list and descriptions – Sierra Video UPC-166 User Manual
Page 108

3
UPC-166 Function Submenu List and Descriptions
Table 3-2
UPC-166 Function Submenu List
—
continued
•
already be installed activated. To order features and obtain a license key, contact Cobalt
®
sales at
3-64
UPC-166-OM
(V4.0)
Sets the test tone frequency for each of four tone
generators (Tone Generator 1 thru 4).
• Frequency Selection Lists
•
•
Selects the frequency for each of the four tone generators. 18 discrete
sine wave frequencies are available, ranging from 50 Hz to 16 kHz
(default frequency is 1.0 kHz).
Note: Unity-gain signal level is equivalent to -20 dBu.
Allows activation of optional licensed features.
Note:
For card pre-ordered with licensed feature(s), the activation steps described below are not required; the feature will
[email protected] or at the contact information in Contact Sierra Video. in Chapter 1,
―Introduction‖. Please
provide th
e ―SSN‖ number of your card (displayed in the Card Info pane) when contacting us for your key.
• License Feature and Key Entry window
Activate licensable feature as described below.
1. Enter the feature key string in the Feature Key box. Press return or
click outside of the box to acknowledge entry.
Note: Entry string is case sensitive. Do not enter any spaces.
2. In the DashBoard
™ Card Info pane, wait for the feature identification to
be shown for the card product number (for example,
―-UM‖ appearing
after the card part number) and Valid Key Entered to be displayed.
This indicates the key was correctly entered and recognized by the
card.
Note: If DashBoard
™ card function submenu/control pane does not
re-appear, close the card and re-open it.
3. Click and confirm Reboot. When the card function submenu/control
pane appears again, the licensable feature will be available.
Note: Applying the licensable feature and its reboot has no effect on
prior settings. All control settings and drop-down selections are
retained.
Aud
Card Edge Control Menu:
Select Tone Generator (1
thru 4)
Select frequency for
selected tone generator (in Hz)
1
Tone
2
TG1
...
TG4
3
50
...
16K