Sierra Video UPC-166 - Manual (Page 112)

3
UPC-166 Function Submenu List and Descriptions
In the example here, Embedded Channels 1 thru 5 are de-embedded from the
input SDI data and routed to discrete AES channels 1 thru 5. Also, an internal
tone generator (TG1) and two analog inputs are routed to AES channels 6 thru
8, respectively. Figure 3-9 (sheet 2) shows the UPC-166 control settings (in
this example, using the DashBoard™ user interface) that result in this
routing.
AN-AUD IN 1 Ch 1
Figure 3-9 Audio Routing Example (Sheet 2 of 3)
3-68 UPC-166-OM
(V4.0)
AUD_ROUTE_EX1_V4.PNG
Embed Ch 1 AES Ch 1
AES OUT 1
AES Ch 3
AES OUT 2
AES Ch 5
AES OUT 3
AES Ch 7
AES OUT 4
og
AN-AUD IN 2 Ch 2
Using the AES Audio Out Pairs 1-4
function, the Source selections
shown above route the selected
sources to discrete AES channels 1
through 8. These discrete outputs
are then available on the UPC-166
card Rear I/O Module AES OUT 1
thru AES OUT 4 BNC connectors.
UPC-166
SDI IN
Anal
Embed Ch 2 AES Ch 2
Embed Ch 3
AES Ch 4 Embed Ch 4
Embed Ch 5
AES Ch 6
TG1
AES Ch 8
Analog
Audio
De-Embed