Comtech EF Data SDM-2020 - Manual (Page 82)

SDM-2020 Satellite Demodulator Revision 4
Front Panel Operation MN/SDM2020D.IOM
6–18
Function Select: Configuration: Interface: RX 2047 Pattern
RX 2047 PATTERN
OFF
Programs detection of 2047 pattern On or Off.
Upon entry, the current status is displayed. Press [
↑] or [↓] to make the selection. Press
to execute the change.
IMPORTANT
This is a test mode and the front panel test LED, will blink when 2047
pattern.
Function Select: Configuration: Interface: INTF Loopback
(Conditional)
INTF LOOPBACK
OFF
Programs the demodulator OFF or ON for interface loopback operation.
IMPORTANT
Available in ASI, ASI/LVDS, G.703, or SMPTE 310M interface.
On entry, the current status of interface loopback is displayed. Press [
↑] or [↓] to make
the selection. Press to execute the change.