Comtech EF Data SDM-2020 - Manual (Page 80)

SDM-2020 Satellite Demodulator Revision 4
Front Panel Operation MN/SDM2020D.IOM
6–16
6.1.5.3 Function Select: Configuration: Interface
CONFIGURATION
INTERFACE
Press to review or edit the following sub-menus.
Function Select: Configuration: Interface: RX Clock Phase
(Conditional)
RX CLOCK PHASE
NORMAL
Programs the RX Clock Phase to Normal or Inverted.
IMPORTANT
Not available with G.703 interface.
Upon entry, the current status of the RX Clock is displayed. Press [
↑] or [↓] to make the
selection. Press to execute the change.
Function Select: Configuration: Interface: RX Data Phase
RX DATA PHASE
NORMAL
Programs RX Data Phase to NORMAL or INVERT.
On entry, the current setting for the RX Data Phase is displayed. Press [
↑] or [↓]
to select NORMAL or INVERT. Press to execute the change.