Comtech EF Data SDM-2020 - Manual (Page 75)

SDM-2020 Satellite Demodulator Revision 4
Front Panel Operation MN/SDM2020D.IOM
6–11
Function Select: Configuration: Demodulator: RX-SR
(Conditional)
RX-IF FREQUENCY
1200.0000 MHZ
For L-Band only: Programs the demodulator receive frequency between
950 to 1750 MHz, in 2.5 kHz steps.
RX-IF FREQUENCY
70.0000 MHZ
For 70/140 MHz only: Programs the demodulator receive frequency between
50 to 90 MHz and 100 to 180 MHz, in 2.5 kHz steps.
On entry, the current receive frequency is displayed with the flashing cursor on the first
character. Press [
←] or [→] to move the flashing cursor. Press [↑] or [↓] to increment or
decrement the digit at the flashing cursor. Press to execute the change.
Function Select: Configuration: Demodulator: LNB Power
(Conditional)
LNB POWER
OFF
IMPORTANT
4-Channel RF card installed.
4-Channel RF card defaults to “OFF.”
Programs the LNB Power ON or OFF. (L-Band only.)
On entry, the current status of the LNB Power is displayed. Press [
↑] or [↓] to select ON
or OFF. Press to execute the change.