Comtech EF Data SPOD PS 1, PS 1.5, and PS 2 C-, X-, or Ku-Band - Manual (Page 172)

SPOD C-, X-, or Ku-Band Outdoor Amplifier MN-SPODPSX
Appendix B Revision 1
B-2
B.2 Control and Data Cables
App B
FIG
CEFD
CABLE P/N
DESCRIPTION USED FOR:
REF App A
FIG
B-1 CA-0020526
Serial Interface Cable
(19-pin circular connector to RJ-11)
Connecting1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone
SPOD ‘J6 | COM1’ receptacle to CLC-10 RJ-11 comms jack
(Cable and CLC-10 are furnished as part of optional CEFD KIT KT-
0020518 )
A-1, A-3
through A-23
B-2 CA-0000352
Ethernet Interface Cable
(19-pin circular connector to <2X> RJ-45)
Connecting 1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone
SPOD ‘J6 | COM1’ receptacle to LPODnet Ethernet jack
(Cable and LPODnet are furnished as part of optional CEFD KIT
KT-0000203 )
A-2, A-3
through A-23
B-3 CA-0000318
100’ COMMS Cable
(19-pin circular connector to bare end) Connecting 1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone
SPOD ‘J6 | COM1’ receptacle to user-specified M&C interface
A-3 through
A-23
B-4 CA-0000543
250’ COMMS Cable
(19-pin circular connector to bare end)
A-3 through
A-23
B-5 CA-0020657
Tx-only Redundant Loop Cable
(19-pin circular receptacle to <1X> Type ‘N’ connector, <2X>
19-pin circular connectors)
Interconnecting 1:1 Redundancy System SPOD units, Tx switch, and
user M&C interface
A-3 through
A-23