Avery Dennison 9406 System Administrator Guide - Manual (Page 86)

Entering Bar Code Fields
Refer to the Bar Code Fields section of the Format
Worksheet.
Type all values from boxes B1 through B12. Remember
•
Enter all values, starting with the B in box B1.
•
Enter all information in CAPITAL letters.
•
Place a comma between all values.
•
Make sure you have 12 items.
•
Place a split vertical bar p after item 12.
•
Go to a new line after the vertical bar.
If you are applying field options to this field, follow the
instructions under "Applying Field Options" to insert
options after the bar code field.
If field #4 is a bar code, your file should now look like this:
{
F,1,A,R,E,300,200,"Textiles"
p
T,1,10,V,250,50,0,1,1,1,B,C,0,0
p
D,2,20
p
D,3,3
p
B,4,12,V,150,40,1,2,80,7,L,0
p
9406 System Administrator’s Guide
6-6