Avery Dennison 9406 System Administrator Guide - Manual (Page 104)

Cable Interface
This printer is equipped with a 9-pin RS-232 connector. The
printer accepts standard RS-232C electrical signal
transmissions when you connect it to a DB-9S connector.
Here are the pin assignments for the connector:
Pin Description
2
8
6
1
Received data
Clear to send
Data set ready
Data carrier detect Input
Input
Input
Input
3
7
4
Transmitted data
Request to send
Data terminal ready Output
Output
Output
Shield
5
9
Protective ground
Signal ground
N/C Ground
Ground
9406 System Administrator’s Guide
7-6