Avery Dennison 9406 System Administrator Guide - Manual (Page 26)

8. Measure the width of the supply
from left to right, using the ruler
marks at the bottom of the grid.
Write the width in box F7.
Ranges for supply width:
English 220-420
Metric 559-1064
Dots 423-807
9. Trace an outline of the supply
on the grid.
10. Assign a name (up to 8 characters)
to the format. Write the name in
box F8. Put quotation marks
around the name, like this:
"LABEL 1"
If you want the printer to assign a name to the format,
place quotation marks, with no characters or spaces
between them, in box F8. The printer will assign a name in
the form of "AUTOnnnn."
11. Make sure you have filled in boxes F1 through F8 on the
Format Worksheet.
Now you are ready to define the contents of your format.
Continue with "Defining Text Fields," "Defining Constant Text
Overlays," "Defining Bar Code Fields," or "Defining
Non-Printable Text Fields."
9406 System Administrator’s Guide
2-12