Avery Dennison 9406 System Administrator Guide - Manual (Page 49)

3. Write the maximum number of characters to be entered in
this field (1-30) in box D3.
NOTE: If you copy this field into another field later,
remember the maximum number of characters for
the final field is 30. Only allow as many
characters as you need.
Also, if you are copying into a bar code field, the
maximum number of characters in the destination
bar code is determined by the bar code
specification.
4. You need to apply field options to manipulate the text
entered in this field. You will most likely copy data from this
field into another field. Follow instructions in Chapter 3
under "Copying Data" to apply the copy option to the
destination field.
5. Make sure you filled in boxes D1 through D3.
6. Repeat steps 1 through 5 for all
non-printable fields.
Desi
g
n
in
g
a
F
o
rmat
2. Designing a Format
2-35