Avery Dennison 9406 System Administrator Guide - Manual (Page 54)

4. Measure from the bottom
of the print area to the
upper right corner of the
box. Write the distance in
box Q4.
5. Measure from the left edge
of the print area to the
upper right corner of the
box. Write the distance in
box Q5.
6. Using the chart below for
reference, write your desired
line thickness (1-99) in box
Q6. Thickness is measured
in dots (1 dot = 1/192 inch).
Thickness Example
1
5
10
20
30
40
50
60
75
90
9406 System Administrator’s Guide
2-40