Avery Dennison 9406 System Administrator Guide - Manual (Page 38)

6. Find "Constant Text" on the
Format Worksheet. Measure
from the bottom of the print area
to the pivot point. Write the
distance, in your selected units,
in box C2.
Ranges for row location:
English 0-800
Metric 0-2032
Dots 0-1536
7. Measure from the left edge of the
print area to the pivot point.
Write the distance in box C3.
Ranges for the column location:
English 0-400
Metric 0-1118
Dots 0-768
8. You can alter space between characters. This gap is
measured in dots (1/192 inch). Write the number of dots (0
to 99) in box C4. Enter 0 for default character spacing.
Any number other than the default number affects your
field width.
Default spacing:
Standard 3 dots
Reduced 1 dot
Bold 3 dots
The character width chart in "Defining Text Fields" reflects
default spacing.
9406 System Administrator’s Guide
2-24