Avery Dennison 9406 System Administrator Guide - Manual (Page 30)

7. Determine the height of the field.
a. Find your selected font and the desired height from the
table below.
b. Draw two lines on the layout grid to show the bottom
and the top of the text field.
Font Magnification
1x 2x 3x 4x 5x 6x 7x
Standard
1/100 in. 11.4 22.8 34.2 45.6 57.0 68.4 79.8
1/10 mm 29.1 58.2 87.3 116.4 145.5 174.6 203.7
Dots 22 44 66 88 110 132 154
Reduced
1/100 in. 7.3 14.6 21.9 29.2 36.5 43.8 51.1
1/10 mm 18.5 37.0 55.5 74.0 92.5 110.0 129.5
Dots 14 28 42 56 70 84 98
Bold
1/100 in. 17.7 35.4 53.1 70.8 88.5 106.2 124
1/10 mm 44.9 89.8 134.7 179.6 224.5 269.4 314
Dots 34 68 102 136 170 204 238
9406 System Administrator’s Guide
2-16