Avery Dennison 9406 System Administrator Guide - Manual (Page 42)

Defining Bar Code Fields
Each bar code field requires a separate definition.
1. Define your format as
shown in this chapter, if
you have not already
done so.
2. Select a bar code field
from your layout to
begin the field definition.
3. Find "Bar Codes" on
the Format Worksheet.
Write a number from 1
to 30 in box B2 to
identify the field.
Number fields in
sequence from 1 to 30.
Do not use any field
number more than
once in a format.
9406 System Administrator’s Guide
2-28