Avery Dennison 9406 System Administrator Guide - Manual (Page 147)

Transmitting Data
Send packets in this order:
1. Check digit packets
2. Format packets
3. Batch packets
The data stream items would appear in an order similar to this.
{ Check digit packet p }
{ Format header
p
field1
p
option
p
option
p
field2
p
option
p
field3 p }
{ Batch header p batch data p p }
On an MS-DOS system, a standard DOS command is used to
transmit the data stream to the printer. For example, the
following commands transmit an ASCII file called FRMT1 to a
9406 printer connected to COM port 1.
MODE COM1:9600,N,8,1,P
COPY FRMT1 COM1
If the printer is connected to COM port 2, change "COM1" to
"COM2" in the above statements.
On
li
ne
I
n
fo
rm
a
tio
n
11. Online Information
11-35