Avery Dennison 9406 System Administrator Guide - Manual (Page 51)

4. Measure from the bottom of
the print area to the point
where the line begins. Write
the distance, in your selected
units, in box L3.
Ranges for row location
English 0-800
Metric 0-2032
Dots 0-1536
5. Measure from the left edge of
the print area to the point
where the line begins. Write
the distance, in your selected
units, in box L4.
Ranges are
English 0-400
Metric 0-1118
Dots 0-768
6. Measure from the bottom of the print area to the point
where the line ends. Write the distance in box L5. Ranges
are the same as above.
NOTE: For horizontal lines, the number in box L5 must
match box L3.
7. Measure from the left edge of the print area to the point
where the line ends. Write the distance in box L6. Ranges
are the same as above.
NOTE: For vertical lines, the number in box L6 must
match box L4.
Desi
g
n
in
g
a
F
o
rmat
2. Designing a Format
2-37