Listing of all status reports, 1000 no new command, 1001 parameter table – Avery Dennison Monarch 9864 Error Messages User Manual
Page 8: 1002 comm. sorting, 1003 too many slashes, 1004 slash w/o param, 1005 2 same commands, 1006 letter incorrect, 1007 command incorr, No new command
05/08 Rev. AB
USER MANUAL
Error Messages
9844 – 9854 – 9864
8
Listing of all Status reports
1000
No new command
Status
General software error
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1001 Parameter
Table
Status
General software error
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1002 Comm.
sorting
Status
General software error
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1003
Too many slashes
Status
General software error
Action
See notes in “General software errors” section.
1004
Slash w/o param.
Status
General software error
Action
Press Online to acknowledge.
See notes in “General software errors” section.
1005
2 same commands
Status
General software error
Action
Press Online to acknowledge.
See notes in “General software errors” section.
1006 Letter
incorrect
Status
General software error: self-acknowledging
Action
See notes in “General software errors” section.
1007 Command
incorr.
Status Unknown
command.
Action
Check Easy Plug sequence.