1395 label too wide, 1396 label too long, 1397 label too short – Avery Dennison Monarch 9864 Error Messages User Manual
Page 24: 1398 label too small, 1470 x-offset, 1471 y-offset, Label too wide, Label too long, Label too short, Label too small

05/08 Rev. AB
USER MANUAL
Error Messages
9844 – 9854 – 9864
24
1395
Label too wide
Status
A printjob contains an #IM-command which exceeds the maximum
label/print width. The maximum print width depends on the printer type.
See the user manual for the maximum label width.
Action
Reduce the label width set by the #IM-command in the print job, until the
label width matches the maximum print width.
1396
Label too long
Status
Label length setting exceeds the maximum label length. The maximum
label length depends on the printer's memory configuration.
The info-printout "Memory Status" shows the maximum label length. See
the user manual for more information.
Action
Reduce the label width setting.
1397
Label too short
Status
The label length defined in the #IM command is smaller than the minimum
length.
Action
Correct the length value in the label layout definition.
1398
Label too small
Status
The label width defined in the #IM command is smaller than the minimum
width.
Action
Correct the width value in the label layout definition.
1470 X-Offset
Status
The x-position of a layout field (graphics, text, ...) is beyond the label
margin. The field is shifted automatically to the first valid position at the
correct side of the margin.
Action
Check the x-positions of the layout fields and change them.
1471 Y-Offset
Status
The y-position of a layout field (graphics, text, ...) is beyond the label
margin. The field is shifted automatically to the first valid position at the
correct side of the margin.
Action
Check the y-positions of the layout fields and change them.