Avery Dennison Monarch 9864 Error Messages - Manual (Page 13)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
13
1038 Software error
Status General software error
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1087 OLV not active
Status Verifier-specific Easy Plug commands have been used (#OLVI or #OLVD),
without having set the printer to use a verifier.
Action Set the printer to verifier use.
See parameter
INTERF. PARAM > COM2 PORT > Function Option
.
1088 No realtimeclock
Status Realtime clock-specific Easy Plug commands have been used (#YS or
#YC), without having a realtime clock installed.
Action Install a realtime clock.
1089 Seek Fkt. Error
Status General software error. An error occurred while processing the seek
function in the printer's internal file system.
Action Press Online to acknowledge.
Please read the notes in section "General software errors".
1090 Incomplete Job
Status The actual print job is not terminated by the #Q command. The start
command #ER for a label format follows another #ER command without the
first format ending with #Q.
Action Press Online to acknowledge.
End the print job with a #Q command.
1091 Wrong var field
Status An error occurred while interpreting the text string of a variable data field.
The error could be caused by a #YT or a #YB command (Easy Plug).
Self-acknowledging error.
Action Check the text strings of variable data fields.
1092 Rename file
Status General software error
Action See notes in “General software errors” section.