Avery Dennison Monarch 9864 Error Messages - Manual (Page 28)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
28
1519 Cmd Init Error
Error level 1
Status General software error.
Action See notes in “General software errors” section.
1520 Unsupported Cmd
Error level 1
Status Non critical commands are not supported.
Action Check and change the commands in the printjob.
1521 Unsupported: x
Error level 2
Status Critical commands are not supported.
Action Check and change the commands in the printjob.
1522 Bad Char Set x
Error level 2
Status The character set selected by ^CI command is not supported. (For
example, Japan, EUC-Kanji and etc.).
Action Use a supported character set.
1523 Cmd Parm Error
Error level 1
Status Error encountered while parsing command parameter.
Action Check and change the commands in the printjob.
1524 d/mm not chg x
Error level 2
Status Command tries to lower print density on a 200 dpi printer.
Action Check and change the commands in the printjob.
1525 USI not exist
Error level 1
Status The printer is not equipped with a USI board.
Action Change the printjob.
Install a USI board.