1501-1535 messages, which can occur with mli, 1501 unknown mli cmd, 1502 mli hash error – Avery Dennison Monarch 9864 Error Messages User Manual
Page 25: 1503 filename too long, 1504 param > max, With mli, Unknown mli cmd, Mli hash error, Filename too long, Param > max

05/08 Rev. AB
USER MANUAL
Error Messages
9844 – 9854 – 9864
25
1501-1535 Messages,
which can occur with MLI
Avery Dennison's MONARCH LANGUAGE INTERPRETER™ (MLI™)
helps you use a MONARCH® 9854™ or 9864™ printer which was set up
for use with ZIH Corp.’s ZPL II®. If you have any questions about using a
MONARCH® printer with these data streams, please contact Service. This
section lists the error messages that may appear when using the ZPL II®
commands interpreted by the MONARCH® 9854™/9864™ printer’s
MONARCH LANGUAGE INTERPRETER™.
1501
Unknown MLI Cmd
Error level
1
Status
An unknown ZPL II® command was encountered.
Action
Check if the printjob was processed correctly. If yes, ignore the message, if
no, change the printjob.
1502
MLI Hash Error
Error level
1
Status
General software error.
Action
See notes in “General software errors” section.
1503
Filename Too Long
Error level
1
Status
Filename is too long.
Action
Rename the file with a shorter name.
1504
Param > Max
Error level
1
Status
Parameter exceeds the maximum value defined.
Action
Shorten the parameter.
ZPL II is a registered trademark of ZIH Corp. ZIH Corp. and Avery
Dennison (including Paxar Corporation and its subsidiaries) are not related
in any way, and ZIH Corp. has not licensed or otherwise sponsored
MONARCH® printers or Avery Dennison's MONARCH LANGUAGE
INTERPRETER™. MONARCH®, MONARCH LANGUAGE
INTERPRETER, MLI, 9854, and 9864 are trademarks of Paxar Americas,
Inc. Avery Dennison is a registered trademark of Avery Dennison
Corporation.