Avery Dennison Monarch 9864 Error Messages - Manual (Page 63)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
63
8950 Logo open
Status Failure when attempting to read a logo, which has previously been copied
on RAM disk or on Compact Flash card (thus using Easy Plug command
#DK).
Action Reload the logo via #DK command.
If this error reoccurs, call Service.
8951 File format
Status General software error.
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
8952 Not installed
Status General software error.
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
9000 Wrong errornum
Status General software error.
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
9001 Software Error
Status General software error.
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
9003 Print head type
Status The wrong printhead type is selected in the printer menu.
Action Correct the setting of the printhead type.
Set the printhead type using parameter
SPECIAL FUNCTION > Printhead type
.