Avery Dennison Monarch 9864 Error Messages - Manual (Page 31)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
31
2006 Exp.functionname
Status A wrong function name is used in the expression.
Action Check if the function names used in the expression are spelled correctly
and if the functions exist. Change the function name.
2007 Exp.fct.paratype
Status A wrong parameter type in an expression was detected.
Example: SubStr(“Text”,o,”A”) causes an error because “A” is not a
number.
Action Check the expression and correct it.
2008 Exp.fct.paraCnt
Status Wrong number of function parameters in the expression.
Action Check the expression and correct it.
2009 Exp. name wrong
Status An undefined variable name is used in an expression.
Action Check the variable names and correct the spellling or define a new
variable.
3000 RS232 Overrun
Status Receive error at the RS232 interface COM1 (overrun).
Action Press Online to acknowledge.
3001 RS232 Parity
Status Receive error at the RS232 interface COM1 (parity).
Action Press Online to acknowledge.
Check parameter setting at printer (
INTERF. PARAM. > COM1 PORT > Parity
) and
PC.
See the User Manual for more information about printer parameters.
3002 RS232 Frame
Status Receive error at the RS232 interface COM1 (frame).
Action Press Online to acknowledge.
Check parameter setting at printer ( INTERF. PARAM. > COM1 PORT > Baud rate
and
INTERF. PARAM. > COM1 PORT > stop bits
) and PC.
See the User Manual for more information about printer parameters.
3003 RS232 Overrun
Status Receive error at the RS232 interface COM2 (overrun).