Avery Dennison Monarch 9864 Error Messages - Manual (Page 15)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
15
1114 < Limit value
Status An Easy Plug command sent to the printer contains a value that exceeds
the valid range at the bottom limit. The faulty value is replaced
automatically by a default value matching the limits.
Example: #YT109/-1/. The value –1 has been assigned to the parameter d.
Valid value for d is 0, 1, 2, 3. Therefore, -1 exceeds the value range at the
bottom limit.
Action Check the Easy Plug command for valid values and correct them if
necessary.
1115 > Limit value
Status An Easy Plug command sent to the printer contains a value, which exceeds
the valid range at the top limit. The faulty value is replaced automatically by
a default value matching the limits.
Example: #YT109/5/. The value 5 has been assigned to the parameter d.
Valid value for d is 0, 1, 2, 3. Therefore, 5 exceeds the value range.
Action Check the Easy Plug command for valid values and correct them if
necessary.
1120 Incorr. logo no.
Status Logo number is invalid because it is outside of the address field.
(self-acknowledging)
Action Make sure the logo number is within the range 0 to 255.
1121 Logo exists
Status Logo already exists.
Action Change the designation of the logo and resave.
1122 Creating logo
Status General software error
Action See notes in “General software errors” section.
1123 Rename logo
Status General software error
Action See notes in “General software errors” section.
1124 Logo file
Status General software error
Action See notes in “General software errors” section.