1030 command incorr, 1031 too many slashes, 1032 incorrect char – Avery Dennison Monarch 9864 Error Messages User Manual
Page 12: 1033 uninit flash par, 1034 uninit restrict, 1035 uninit combi, 1036 wrong combi para, 1037 software error, Command incorr, Too many slashes

05/08 Rev. AB
USER MANUAL
Error Messages
9844 – 9854 – 9864
12
1030 Command
incorr.
Status
Error during the command interpretation.
Action
Check Easy Plug sequence.
1031
Too many slashes
Status
Too many parameters between two slashes.
Action
Check Easy Plug sequence.
1032 Incorrect
char.
Status
Parameter contains an invalid character.
Action
Check Easy Plug sequence.
1033
Uninit flash par
Status
General software error
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1034 Uninit
restrict
Status
A restricted string parameter could not be initialized.
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.
1035 Uninit
combi
Status
General software error. A combi parameter could not be initialized.
Action
Press Online to acknowledge.
See notes in “General software errors” section.
1036
Wrong combi para
Status
General software error. A combi parameter could not be initialized.
Action
Press Online to acknowledge.
See notes in “General software errors” section.
1037 Software
error
Status
General software error
Action
Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.