5529 parameter range, 5530 unknown cmd, 5531 protocol length – Avery Dennison Monarch 9864 Error Messages User Manual
Page 49: 5532 cmd not avail, 5540 iso error #1, 5541 iso error #2, 5542 iso error #3, 5543 iso error #15, 5544 iso error #16, Parameter range

05/08 Rev. AB
USER MANUAL
Error Messages
9844 – 9854 – 9864
49
5529 Parameter
range
Status
Faulty address. Transponders of the same type may have different size
memory ranges and addresses.
The error occurs if the block address is beyond the address range of the
transponder.
Action
Change the address.
Use a transponder with a wider address range.
5530 Unknown
CMD
Status
The reader does not support the command.
Action
Change or replace the command.
5531 Protocol
length
Status
General software error
Action
See notes in “General software errors” section.
5532 CMD
not
avail.
Status
The command cannot be executed.
Action
Check if all system components match the specifications.
5540
ISO error #1
Status
Faulty system configuration for one of the following reasons:
•
Incorrect reader firmware version.
•
The applied transponders do not match the reader.
Action
Verify the firmware.
Verify the transponder and use another transponder that is recognized by
the reader.
5541
ISO error #2
See ISO error #1.
5542
ISO error #3
See ISO error #1.
5543
ISO error #15
See ISO error #1.
5544
ISO error #16
See ISO error #1.